Core services offered by A‑1 Concrete Leveling & Foundation Repair
A‑1 specializes in slab leveling, pier installation, and foundation crack repair for residential and commercial properties throughout St. Louis. The company uses laser‑guided mudjacking or foam injection to lift sunken concrete, and helical or push piers to stabilize shifting footings. Additional services include waterproofing, drainage correction, and soil stabilization to prevent future movement.
More from this site
Keep reading the latest coverage
Typical repair process
Technicians begin with a site assessment, measuring vertical deviation with a laser level and identifying underlying causes such as expansive soil or poor drainage. After a written estimate, they excavate only where needed, drill injection ports, and pump a high‑strength, low‑shrink grout or expanding polyurethane foam. The material fills voids, lifts the slab to the original grade, and cures within hours. Finally, the surface is finished with a concrete overlay or sealant to match existing aesthetics.
Key factors that affect cost and timeline
Cost depends on square footage, depth of settlement, and soil conditions. A typical 500‑sq‑ft slab lift in St. Louis ranges from $1,200 to $2,500, while pier installation can add $1,500‑$3,000. Projects usually finish in one to three business days, but extensive foundation work may require a week.
Benefits of choosing A‑1 for foundation repair
- Locally trained crew familiar with Midwest soil behavior
- Warranty on leveling material and structural piers
- Minimal disruption—most work completed while occupants remain on‑site
- EPA‑approved, low‑odor grout reduces health risks
Maintenance tips to prolong repairs
After leveling, keep the area dry and direct water away from the foundation using gutters, downspouts, and proper grading. Inspect for new cracks annually and address drainage issues promptly. A‑1 offers a free post‑repair inspection at six months to verify performance.
Comparison of leveling materials
| Material | Typical Lift Capacity | Curing Time | Best Use |
|---|---|---|---|
| Polyurethane foam | 0.5–1.5 in per injection | 30‑45 min | Small voids, rapid access areas |
| Portland‑based grout (mudjacking) | 1–3 in per injection | 2‑4 hrs | Large settlements, outdoor slabs |